Check gel coat, osmosis, galvanic action, cracks, lamination, fastenings, anodes and protective coatings.

Check skin fittings, transducer blocks and through-hull fittings.

Check non-slip finish, cracks, freeing ports, hatches, securing mechanisms, fittings and fastenings.

Check lamination, cracks, fittings, doors, windows, fastenings and protective coatings.

Check lamination, structural members, galvanic action, bulkheads and engine mounting pads.

Check fittings and pads are secure and in good condition.

Check lamination, gel coat, timberwork, fittings, fixtures, doors, windows, portholes and fastenings.

Check structural members and fastenings.

Check lamination, gel coat, finishes, fixtures and fittings.

Check treads and non-slip condition.

Check condition, mountings and operation.

Check anchor condition.

Check chain and shackle condition and confirm shackles are moused.

Inspect and maintain in accordance with manufacturer specifications.

Check rams, hydraulics, hydraulic connectors, linkages and rudder travel.

Check tanks, valves, fillers, breathers, remote shut-offs and pipework.

Check freshwater pump, toilet flush, pump-out, bilge pumps and the emergency fire/bilge (fire-hose) pump. Check fittings, pick-ups, valves, hoses/pipework, operation and leaks.

Check all 3 battery banks: Port, Starboard and House. Check connections, battery condition/fluid level as applicable, isolators and cabling.

Check connections and ELV boards.

Check connections and wiring runs.

Check anodes and that fittings are correctly earthed.

Check operation, lenses, mountings and backboards.

Check the Anchor light and Not Under Command (NUC) light are operational, correctly mounted and in serviceable condition.

Confirm deviation card is current.

Check both VHF radios: fixed wheelhouse set and portable VHF. Check operation, condition, power/charging and battery condition as applicable.

Check the combined GPS/plotter unit including sounder and depth-gauge functions, display, transducer input and operation in accordance with manufacturer specifications.

Check condition and labelling.

Check condition, retro-reflective tape, buoyant line, light and labelling.

Check Carley Floats are in serviceable condition, correctly secured/stowed, accessible and ready for deployment.

Check mounting, registration and battery status.

Check required number and expiry dates.

Check fully stocked contents and expiry dates.

Check mountings and service status.

Check condition, paint and labelling.